10 Websites To Help You To Become An Expert In Repairs To Upvc Windows
10 Websites To Help You To Become An Expert In Repairs To Upvc Windows
Blog Article
Repairs to uPVC Windows
uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as timber and aluminum.
It is important to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.
1. Broken Glass
If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good repair.
Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this case, you will need to source some plastic spacers that will aid the new pane in being able to fit properly into the frame of the window.
If you are going to attempt to remove the window panes by yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor which could cause them to be trampled under.
It's a good idea to cover the gap with tape after the glass is removed. This will keep water and drafts from entering your home until a professional is able to repair the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window as it offers the best of both worlds.
2. Sagging
Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can be affected by a variety of issues, including sliding. A sagging window in uPVC can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from getting worse.
To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need open the window so that you can access the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they remain in position.
If you are unable to move the hinges, you could have to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows remain watertight and draught-proof.
uPVC handles can also become loose. Often, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and perform an initial fitting. The corners of the sash should be aligned with the casing joint. If it isn't, you can use a screwdriver to loosen the handle, and then turn the mechanism back into position.
3. Water Leaks
If you wake up to damp floors and mouldy walls each time it rains it's crucial to take action. Windows that leak water do not only lead to the degradation of your home's structure but also undermine your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.
This is a relatively easy fix that can be completed by any competent DIYer. Depending on how severe the issue is, old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and reduce your energy efficiency.
Verify that the drainage holes do not have debris in them and that the sill pan has been properly angled to drain away from the window. In more serious situations, you may need to think about replacing the window.
Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in humid conditions and can propagate quickly throughout the home.
If the leakage occurs between the double-glazed window, it is more likely that the issue is related to the seal, not the frame. This can be easily fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be at fault for the reason that your uPVC window is difficult to open or it opens with the breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.
Like any mechanical component, hinges can be damaged over time. It is very easy to replace a hinge on a window however it is simpler if you have someone to help you hold the frame.
It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should open.
Faulty window hinges could be caused by improperly opening the window in a particular way or due to improper installation in the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be pleased to offer you advice.
Regular lubrication of hinges is also essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.
5. Draughts
Draughts can be caused by different causes. The hinges can also become disaligned as a result of wear, creating an opening between the frame and sash. If they are damaged beyond repair, it might be necessary to have them realigned. The interlock, which is located on the hinge of the window and can be misaligned. Again, it may be possible to just give them a clean but in certain cases, it may be necessary to have these replaced.
The seals may wear out or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures, and reduce the possibility of draughts.
Another method of reducing drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be placed over your window sill. These will keep your home warm by blocking cold air.
With glass repairs a little regular maintenance and repairs, your upvc windows will continue to provide excellent security and insulation for your home. It is crucial to recognise that all windows have a life span and they may reach an point at which it is more efficient to replace them than fix them. So, if you're experiencing problems with your upvc windows, it is always best to seek professional assistance immediately.